Github Openssh



Table Of Contents

  • When to use SSH keys instead of HTTPS

Set environment variable GITSSH=fullpathtoplink.exe (must not be quoted). This will redirect git ssh-communication-related commands to plink that will use the pageantservice for authentication without asking for the password again. Note1: This documentation warns about some peculiarities when working with the GITSHH environment.

Pre-requisites

  1. In terminal enter this command with your ssh file name pbcopy github account Go to Settings SSH and GPG keys New SSH key Enter title and paste the key from clipboard and save it.
  2. If you have GitHub Desktop installed, you can use it to clone repositories and not deal with SSH keys. Ensure the ssh-agent is running. You can use the 'Auto-launching the ssh-agent' instructions in ' Working with SSH key passphrases ', or start it manually: # start the ssh-agent in the background $ eval `ssh-agent -s` Agent pid 59566.
  3. To verify SSH is working for our Git, we can try the following command on Git Bash: ssh -T git@github.com. If everything works well, then the prompt would say “ You’ve successfully authenticated “. Last thing, to use SSH login, the remote urls of repositories need to be SSH type, instead of HTTPS type. See here to change it.
Openssh
  • Git Bash

When to use SSH keys instead of HTTPS

  • Your corporate firewall blocks port 22, then even if you have set the remote origin to use HTTPS url, the authentication will fail as it is done via SSH.

Remedy is to set up SSH keys and use SSH over HTTPS port 443.

Below are some of the errors different applications throw when the port is blocked and HTTPS remote url is used.

Git Bash

When you try to push your changes, both Github Login and OpenSSH prompt asking for your username and password will fail with error remote no anonymous write access. fatal authentication failed for github.

Github Desktop Application

You will be able to login to your github desktop application as the authentication is done via HTTPS. However, when you try to push your changes it will result in authentication failure.

Below is the logs captured by the desktop application showing that the git push is trying to authenticate via SSH.

Generate new SSH key

  • Run Git Bash.

  • Generate SSH key with your email id as comment.

  • When you’re prompted to “Enter a file in which to save the key,” press Enter to save the key in the default location (/c/Users/username/.ssh/id_rsa). Your public key will also get saved here.

  • Copy the public key to clipboard.

Add public SSH key to your GitHub account

Go to Settings in your Github account to add the SSH public key.

Under SSH keys tab, select New SSH key.

Give a title and paste the key in the text area.

Like the content ?

Add private SSH key to the ssh-agent

Git bash tool comes with a ssh-agent.

Create a new ~/.profile (or) ~/.bashrc file by running below command in git bash.

Paste below script into your ~/.profile (or) ~/.bashrc file to auto launch the ssh-agent whenever you run your git bash shell.

This script will load the identities in the ssh agent from your default location ~/.ssh/id_rsa.

Use SSH over HTTPS

Canon ipf760 driver windows 10. This step is required only if your corporate firewall is blocking port 22.

Create a new config file in your .ssh directory i.e. /c/Users/username/.ssh/config

Paste below contents in the file to use port 443 for SSH connections to host ssh.github.com.

Run below command in git bash to verify that the configuration is working. Ignore any authentication failures.

You can see that the SSH connection is now established via port 443.

Verification

To check if everything works as expected perform below steps:

  • Run new git bash shell.

  • Check if the identity has been added to the ssh agent.

  • Check that the key is being used by trying to connect to git@github.com.
  • Clone the repo using the SSH url.

Going forward, every push/pull will use the SSH keys to authenticate with Github.

Like the content ?

References

-->

Azure DevOps Services | Azure DevOps Server 2020 | Azure DevOps Server 2019 | TFS 2018 - TFS 2015

Connect to your Git repos through SSH on macOS, Linux, or Windows to securely connect using HTTPS authentication. On Windows, we recommended the use of Git Credential Manager Core or Personal Access Tokens.

Important

SSH URLs have changed, but old SSH URLs will continue to work. If you have already set up SSH, you should update your remote URLs to the new format:

  • Verify which remotes are using SSH by running git remote -v in your Git client.
  • Visit your repository on the web and select the Clone button in the upper right.
  • Select SSH and copy the new SSH URL.
  • In your Git client, run: git remote set-url <remote name, e.g. origin> <new SSH URL>. Alternatively, in Visual Studio, go to Repository Settings, and edit your remotes.

Note

As of Visual Studio 2017, SSH can be used to connect to Azure DevOps Git repos.

How SSH key authentication works

SSH public key authentication works with an asymmetric pair of generated encryption keys. The public key is shared with Azure DevOps and used to verify the initial ssh connection. The private key is kept safe and secure on your system.

Set up SSH key authentication

The following steps cover configuration of SSH key authentication on the following platforms:

  • Linux
  • macOS running at least Leopard (10.5)
  • Windows systems running Git for Windows

Configure SSH using the command line. bash is the common shell on Linux and macOS and the Git for Windows installation adds a shortcut to Git Bash in the Start menu.Other shell environments will work, but are not covered in this article.

Step 1: Create your SSH keys

Note

If you have already created SSH keys on your system, skip this step and go to configuring SSH keys.

The commands here will let you create new default SSH keys, overwriting existing default keys. Before continuing, check your~/.ssh folder (for example, /home/jamal/.ssh or C:Usersjamal.ssh) and look for the following files:

  • id_rsa
  • id_rsa.pub

If these files exist, then you have already created SSH keys. You can overwrite the keys with the following commands, or skip this step and go to configuring SSH keys to reuse these keys.

Create your SSH keys with the ssh-keygen command from the bash prompt. This command will create a 2048-bit RSA key for use with SSH. You can give a passphrasefor your private key when prompted—this passphrase provides another layer of security for your private key.If you give a passphrase, be sure to configure the SSH agent to cache your passphrase so you don't have to enter it every time you connect.

This command produces the two keys needed for SSH authentication: your private key ( id_rsa ) and the public key ( id_rsa.pub ). It is important to never share the contents of your private key. If the private key iscompromised, attackers can use it to trick servers into thinking the connection is coming from you.

Step 2: Add the public key to Azure DevOps Services/TFS

Associate the public key generated in the previous step with your user ID.

  1. Open your security settings by browsing to the web portal and selecting your avatar in the upper right of theuser interface. Select SSH public keys in the menu that appears.

  2. Select + New Key.

  3. Copy the contents of the public key (for example, id_rsa.pub) that you generated into the Public Key Data field.

    Important Call of duty 4 profil download ebene 55 soda.

    Avoid adding whitespace or new lines into the Key Data field, as they can cause Azure DevOps Services to use an invalid public key. When pasting in the key, a newline often is added at the end. Be sure to remove this newline if it occurs.

  4. Give the key a useful description (this description will be displayed on the SSH public keys page for your profile) so that you can remember it later. Select Save to store the public key.Once saved, you cannot change the key. You can delete the key or create a new entry for another key. There are no restrictions on how many keys you can add to your user profile. Also note that SSH keys stored in Azure DevOps expire after five years. If your key expires, you may upload a new key or the same one to continue accessing Azure DevOps via SSH.

  5. Test the connection by running the following command: ssh -T git@ssh.dev.azure.com.If everything is working correctly, you'll receive a response which says: remote: Shell access is not supported.If not, see the section on Questions and troubleshooting.

Step 2: Add the public key to Azure DevOps

Associate the public key generated in the previous step with your user ID.

  1. Open your security settings by browsing to the web portal and selecting your avatar in the upper right of theuser interface. Select Security in the menu that appears.

  2. Select + New Key.

  3. Copy the contents of the public key (for example, id_rsa.pub) that you generated into the Public Key Data field.

    Important

    Avoid adding whitespace or new lines into the Key Data field, as they can cause Azure DevOps Services to use an invalid public key. When pasting in the key, a newline often is added at the end. Be sure to remove this newline if it occurs.

  4. Give the key a useful description (this description will be displayed on the SSH public keys page for your profile) so that you can remember it later. Select Save to store the public key. Once saved, you cannot change the key. You can delete the key or create a new entry for another key. There are no restrictions on how many keys you can add to your user profile.

  5. Test the connection by running the following command: ssh -T git@ssh.dev.azure.com.If everything is working correctly, you'll receive a response which says: remote: Shell access is not supported.If not, see the section on Questions and troubleshooting.

Step 3: Clone the Git repository with SSH

Note

To connect with SSH from an existing cloned repo, see updating your remotes to SSH.

  1. Copy the SSH clone URL from the web portal. In this example, the SSL clone URL is for a repo in an organization named fabrikam-fiber, as indicated by the first part of the URL after dev.azure.com.

    Note

    Project URLs have changed with the release of Azure DevOps Services and now have the format dev.azure.com/{your organization}/{your project}, but you can still use the existing visualstudio.com format. For more information, see Visual Studio Team Services is now Azure DevOps Services.

  2. Run git clone from the command prompt.

SSH may display the server's SSH fingerprint and ask you to verify it.You should verify that the displayed fingerprint matches one of the fingerprints in the SSH public keys page.

SSH displays this fingerprint when it connects to an unknown host to protect you from man-in-the-middle attacks.Once you accept the host's fingerprint, SSH will not prompt you again unless the fingerprint changes.

When you are asked if you want to continue connecting, type yes. Git will clone the repo and set up the origin remote to connect with SSH for future Git commands.

Tip

To prevent problems, Windows users should run a command to have Git reuse their SSH key passphrase.

Questions and troubleshooting

Q: After running git clone, I get the following error. What should I do?

A: Manually record the SSH key by running:ssh-keyscan -t rsa domain.com >> ~/.ssh/known_hosts

Q: How can I have Git remember the passphrase for my key on Windows?

A: Run the following command included in Git for Windows to start up the ssh-agent process in PowerShell or the Windows Command Prompt. ssh-agent will cacheyour passphrase so you don't have to provide it every time you connect to your repo.

If you're using the Bash shell (including Git Bash), start ssh-agent with:

Q: I use PuTTY as my SSH client and generated my keys with PuTTYgen. Can I use these keys with Azure DevOps Services?

A: Yes. Load the private key with PuTTYgen, go to Conversions menu and select Export OpenSSH key.Save the private key file and then follow the steps to set up non-default keys.Copy your public key directly from the PuTTYgen window and paste into the Key Data field in your security settings.

Q: How can I verify that the public key I uploaded is the same key as I have locally?

A: You can verify the fingerprint of the public key uploaded with the one displayed in your profile through the following ssh-keygen command run against your public key usingthe bash command line. You will need to change the path and the public key filename if you are not using the defaults.

You can then compare the MD5 signature to the one in your profile. This check is useful if you have connection problems or have concerns about incorrectlypasting in the public key into the Key Data field when adding the key to Azure DevOps Services.

Q: How can I start using SSH in a repository where I am currently using HTTPS?

Github Openssh Client

A: You'll need to update the origin remote in Git to change over from a HTTPS to SSH URL. Once you have the SSH clone URL, run the following command:

You can now run any Git command that connects to origin.

Q: I'm using Git LFS with Azure DevOps Services and I get errors when pulling files tracked by Git LFS.

A: Azure DevOps Services currently doesn't support LFS over SSH. Use HTTPS to connect to repos with Git LFS tracked files.

Q: How can I use a non-default key location, i.e. not ~/.ssh/id_rsa and ~/.ssh/id_rsa.pub?

A: To use keys created with ssh-keygen in a different place than the default, perform these two tasks:

  1. The keys must be in a folder that only you can read or edit. If the folder has wider permissions, SSH will not use the keys.
  2. You must let SSH know the location of the keys. You make SSH aware of keys through the ssh-add command, providing the full path to the private key.

On Windows, before running ssh-add, you will need to run the following command from included in Git for Windows:

This command runs in both PowerShell and the Command Prompt. If you are using Git Bash, the command you need to use is:

You can find ssh-add as part of the Git for Windows distribution and also run it in any shell environment on Windows. Changelog 3 17/2018clout games.

On macOS and Linux you also must have ssh-agent running before running ssh-add, but the command environment on these platforms usuallytakes care of starting ssh-agent for you.

Github Openssh Microsoft

Q: I have multiple SSH keys. How do I use different SSH keys for different SSH servers or repos?

A: Generally, if you configure multiple keys for an SSH client and connect to an SSH server, the client can try the keys one at a time until the server accepts one.

However, this doesn't work with Azure DevOps for technical reasons related to the SSH protocol and how our Git SSH URLs are structured. Azure DevOps will blindly accept the first key that the client provides during authentication. If that key is invalid for the requested repo, the request will fail with the following error:

For Azure DevOps, you'll need to configure SSH to explicitly use a specific key file. One way to do this to edit your ~/.ssh/config file (for example, /home/jamal/.ssh or C:Usersjamal.ssh) as follows:

Q: How do I fix errors that mention 'no matching key exchange method found'?

Github Openssh Win64

A: Git for Windows 2.25.1 shipped with a new version of OpenSSH which removed some key exchange protocols by default.Specifically, diffie-hellman-group14-sha1 has been identified as problematic for some Azure DevOps Server and TFS customers.You can work around the problem by adding the following to your SSH configuration (~/.ssh/config):

Replace <your-azure-devops-host> with the hostname of your Azure DevOps or TFS server, like tfs.mycompany.com.

Q: What notifications may I receive about my SSH keys?

Github Openssh Server

A: Whenever you register a new SSH Key with Azure DevOps Services, you will receive an email notification informing you that a new SSH key has been added to your account.

Openssh Github Windows

Q: What do I do if I believe that someone other than me is adding SSH keys on my account?

A: If you receive a notification of an SSH key being registered and you did not manually upload it to the service, your credentials may have been compromised.

The next step would be to investigate whether or not your password has been compromised. Changing your password is always a good first step to defend against this attack vector. If you’re an Azure Active Directory user, talk with your administrator to check if your account was used from an unknown source/location.

Q: What do I do if I'm still prompted for my password and GIT_SSH_COMMAND='ssh -v' git fetch shows no mutual signature algorithm?

A: Some Linux distributions, such as Fedora Linux, have crypto policies that require stronger SSH signature algorithms than Azure DevOps supports (as of January 2021). There's an open feature request to add this support.

You can work around the issue by adding the following code to your SSH configuration (~/.ssh/config):

Replace ssh.dev.azure.com with the correct host name if you use Azure DevOps Server.